0 votes
in Dating by (300 points)

Vfine plastic bottle making Machine full automatic, full servo system
Application scope
Full automatic blow molding machine is suitable for producing PETplastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle cooking oil bottle, chemical product container, cosmetics, wide-mouth bottle and hot fill bottle etc.
Features of main blowing machine
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
7). Strong clamping force with high pressure and double crank links to lock the mould.
8). Two ways of operating: automatic and manual.
9). Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic technological process.
10). Ideal cooling system make the finished bottles without any flaws.
1.1 New Auto Preform Unscrambler System.
*Adopts one-way preform-feeding structure and preform-separating by servo motor structure which solve the preform block and abrasion problem.
*There are two photoelectric sensors to control preform-loading motor and preform-separating cylinder that will warn the operator to add the preforms into the hopper when lacks preform instead of stopping the machine.
1.2 New Heating System.
*Perfect heating system design decrease power consumption.
*Special oven design helps power saving and easy maintain.
*Each lamp position and temperature can be adjusted from screen.
*Cycling water-cooling system keeps the oven temperature constantly.
1.3 The Application Of Servo System On Main Transmission.
The transmission adopts servomotor for positioning that can orientate the preform-heating base quickly, accurately and steadily when the machine starts and running.
1.4 Servo Technology Innovation On Clamping System & Stretching.
*Adopts servo motor to drive the two cranks to control the clamping system which can shorten the mold-clamping time and improve productivity, and also solve the swelling mold and big joint line problem with the effect of pressurize plate.
* Servo motor using for stretching to ensure the bottle blowing speed faster and more stable bottle quality.
1.5 Easy To Change Bottle Shape.
*Drawer type mold structure design is easy for mold changing. Within 30minutes can change a mold on the condition of same bottleneck diameter.
1.6 Intelligent Human-Machine Interface.
*Human-machine interface control, easy operate and monitor.
*Live production information supervise, auto record production data everyday
ItemYF-4LEYF-6EYF-6LEYF-9E
Cavity Number4669
Machine output5500-6000bph8500-9000Bph8500-9000bph12000-13000bph
Max. volume2L0.75L2L0.75L
Bottle mouth maximum diameter18-38mm18-38mm18-38mm18-38mm
Bottle maximum diameter105mm70mm105mm70mm
Bottle maximum height330mm260mm330mm260mm
total power/ Installation power69KW53KW98KW76
Actual power consumption25-28KW28-35KW30-35KW40-45kw
operating pressure7kg7kg7kg7kg
Low pressure air consumption1500L/min1500L/min1500L/min1500L/min
High pressure air pressure25-35kg/cm225-35kg/cm225-35kg/cm225-35kg/cm2
Higher pressure air consumption5000Ltr/min7000Ltr/min8000Ltr/min10000 Ltr/min
Chilling water pressure2-6 kg/cm22-6 kg/cm22-6 kg/cm22-6 kg/cm2
Temperature range10-12鈩?/p>10-12鈩?/p>10-12鈩?/p>10-12鈩?/p>
Consumption45000kcal/hr45000kcal/hr54000kcal/hr54000kcal/hr
Chilling water flow rate150L/min150L/min180L/min180L/min
Size of the machine(L*W*H)4x2.15x2.54x2.15x2.55.5x2.15x2.55.5x2.15x2.5
Weight of the machine6.5ton6.5ton8ton8ton
Machine details
1)Oil free preform transferring unit, no concern about the preform polluted in transferring unit when heated.
2)World famous brand Germany origin components for whole air system; World famous brand servo system, and electrical system.
3)High quality of machine frame and main plates, ensure at least 15years lifetime.
4)Slight and silent clamping unit, ensure nice working environment for operators
5)+/-3% heating output difference only for the heating oven, ensure the stable preform heating for stable product quality.
Single line preform infeeding unit, no need concern about the preform jam.Automatic Blow Moulding Machine price
website:http://www.vfine-machinery.com/blow-molding-machine/automatic-blow-moulding-machine/

Please log in or register to answer this question.

Welcome to GoMarry.com's Relationships, Dating, Marriage Questions & Answers Section, where you can ask questions and receive answers from our valued community.
...